Fitted wardrobes
For gaps between walls, alcoves and corners. Floor to ceiling and a precise fit, even when the walls aren't square.
Ideal for alcoves, ends of corridors and older built-in cupboards.
Made-to-measure wardrobes and walk-in wardrobes · Elche
A made-to-measure wardrobe project in Perleta begins with the space where the furniture will live: how big it really is, what unevenness it has and which clothes and belongings it needs to hold. Perleta, also referred to as Maitino-Perleta, is a settlement within the municipality of Elche, and you can prepare your design in the configurator with your own dimensions and send it to us. From there we go through the doors, interior layout and next steps with you, so the wardrobe fits the room with no surprises.
Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.
Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.
01 — Solutions in Perleta
For gaps between walls, alcoves and corners. Floor to ceiling and a precise fit, even when the walls aren't square.
Ideal for alcoves, ends of corridors and older built-in cupboards.
Complete wardrobes with doors that need no room to open. With mirror, glass or other finishes.
Ideal if the bed is close by or you have less than 1 m clear in front.
Open or closed, straight, L-shaped or U-shaped. Laid out around what you store, not around a standard module.
Ideal from around 1.5 m wide.
02 — In Perleta
Say you want a wall-to-wall wardrobe in the bedroom of your home in Perleta and, when you get the tape measure out, you find the width changes by several millimetres between the floor and the ceiling. That's common in many homes, which is why a made-to-measure project starts from several measurements rather than just one. Measure the width at the bottom, in the middle and at the top; do the same with the height at both ends and in the middle, and note down the depth in the corners.
Also note whether the floor slopes: place a long spirit level on it and see which way the bubble drifts. Take a look at the bedroom door too: if it opens inwards, check that the door leaf won't hit the future front. Check where there are skirting boards, mouldings or an electrical panel, as they take away usable space. With this sheet of measurements, which you'll repeat in every room of your home in Perleta that is going to have a wardrobe, the design is based on the narrowest measurement and the rest is compensated for with fillers and square-cut finishing pieces. If all this feels like a lot, upload whatever figures you have to the configurator along with a few photos from the front and the side; we'll flag anything missing before the visit.
Tell us about your space
Perleta is listed as a settlement within the municipality of Elche, in the province of Alicante, and in the municipality's health and transport information it appears together with Maitino under the name Maitino-Perleta. For a wardrobe in Perleta, what matters in practice is this: permits for any major renovation are handled by Elche Town Hall, just as in the rest of the municipality.
A made-to-measure wardrobe inside a room in Perleta rarely requires any paperwork. If your plan involves knocking down a partition wall, opening up a gap or altering the main electrical installation, check with the Town Hall first and, if you live in a block, with your residents' association. When you write to us, give the exact address of the project in Perleta, as that lets us confirm the area before planning anything.

Latest work by SI, ARMARIO
@si.armario
Made-to-measure wardrobes and walk-in wardrobes
Latest posts
Not every space can take a classic fitted wardrobe sixty centimetres deep. If the free wall is next to the door or between the bed and the window, a shallow-depth wardrobe may be the better choice, with a little less depth and a more compact interior layout. You lose some capacity per linear metre, but you gain room to move and avoid knocks against the bedroom door.
A fitted wardrobe performs best when you have an alcove or a whole wall to work with. It goes right up to the ceiling, uses the top cupboard for things you rarely get out and hides any irregularities in the building work behind a uniform front. To decide between the two in Perleta, compare how many centimetres of clearance you'd have with each depth and how much long-hanging clothing you own: those two figures are usually enough.
Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.
The door is chosen after measuring the free space. A fifty-centimetre hinged door needs that same distance in front of it to open; if the bed or a chest of drawers is in the way, consider sliding doors. Sliding doors take up less space but only show half of the interior at a time, and their track needs a reasonably level floor, which is exactly what you noted when measuring.
With hinged doors you can reach the whole interior and make use of pull-out drawers and shoe racks. With sliding doors you gain floor space in a small room, but you'll have a central divider. Think about who will be using the wardrobe: for small children lightweight doors matter more, and for older people a visible handle set at a low height is usually more comfortable.
A well-planned wardrobe combines different heights rather than repeating the same one. For shirts and jackets, around one hundred and ten centimetres of drop is enough; coats and dresses need between one hundred and fifty and one hundred and eighty. If you combine two stacked rails with one tall section, you double the capacity in the same width.
In a bedroom in Perleta with little winter clothing you can devote more width to drawers. Adjustable shelves help when you don't know what you'll be storing in a few years' time; fixed ones add rigidity and are best placed where the heaviest loads go. Keep the top cupboard for suitcases and out-of-season clothes, put the drawers at waist height and place shoes at the bottom, with a gentle slope if space allows. First write a rough list of what you own: it translates into centimetres of hanging rail and the number of shelves with surprising accuracy.
You see the outside every day; you use the inside every day. That's why it's worth choosing boards that resist scuffs in the areas where the wardrobe opens and a well-sealed edge where the clothes rest. For the doors, a soft plain colour visually widens a narrow room, a wood tone adds warmth in bedrooms with plenty of light and a mirror on one door takes care of getting dressed without using up wall space.
Check the fittings too: hinges with soft-close, full-extension runners for the drawers and handles that won't catch on the bed. You can try out combinations in the configurator and then talk them through with our team, who will advise you on board thicknesses, supports and sensible loads before anything is fixed.

There is no price per metre that works for everyone. The amount depends on the overall width and height, the number of doors and their system, how many drawers and interior accessories you want and the type of finish. The difficulty of the space also plays a part: a corner, a pillar or an uneven ceiling all call for more fitting work.
To get a reference point, go into the configurator with your measurements, choose a layout and finishes and send us the design. The team will give you an approximate estimate within 24 hours of receiving the configuration with the dimensions, and that estimate costs you nothing. If you'd like to understand better what goes into the calculation, see the prices page.
Once you've accepted the estimate, the measuring visit to your home in Perleta is arranged. It costs €50 if you then don't place an order and is free if you do. It's used to check squareness, floors, sockets and protrusions, and to fix the final design and the definitive quote.
After that comes manufacture, which takes two to three weeks on average. Installation is coordinated separately, depending on your schedule and access to the property. The whole process is summarised in how we work, and if you'd prefer to ask a question before configuring anything, you can message us on WhatsApp or fill in the quote form.
Quote
With your name, a phone number and a photo of the space, we can get started.
What happens next
Frequently asked questions
Because walls, floors and ceilings are rarely perfect. Measuring at the top, in the middle and at the bottom lets us design to the narrowest measurement and absorb the differences with finishing pieces, so a door doesn't rub or a side panel end up forced.
Yes, we cover Perleta, also known as Maitino-Perleta, within the municipality of Elche. To confirm the exact area, give us the project address when you write to us.
Rest a long spirit level on the floor, note which way it slopes and by how many millimetres per metre, and take a photo of the level in that position. That tells us whether we need to allow for adjustable feet or an adjustable base on the wardrobe.
If the existing carcass is sound and the measurements fit, we can look at replacing the fronts. Send us photos of the wardrobe open and closed and the dimensions of each door so we can assess what can be kept.
The height, width and depth of the space at several points, the type of doors you prefer, a list of what you'll be storing and a few photos of the wall and the floor. With that we can give you an idea of the cost before the visit.
Put your design together with your own measurements in the configurator, or tell us about your project. We'll go through the measurements, doors and interior layout with you until we reach your final quote.