Elche: your fitted wardrobe, made to measure for your home

A made-to-measure fitted wardrobe turns an alcove, a corner of the hallway or an entire bedroom wall into storage without taking metres away from the room. In Elche we design it around the real measurements of the space, not a standard module: it is fitted to the width, the height and the irregularities of the building work. Here is what to look at before ordering, how doors and finishing trims are handled, and what affects the price.

Fitted wardrobe · exampleElevation
actual width up to ceiling

Shape your next wardrobe.

Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.

Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.

01 — Before designing

In Elche, your wardrobe is made to measure to fit the space in your home

In Elche, an exact alcove is a rarity. The fitted wardrobe takes those measurements as its starting point, and any differences are resolved with finishing pieces.

  • Alcove
  • End of a corridor
  • Side of a bedroom
  • Under a beam

A piece that belongs to the space

If you have a free alcove in Elche, or a whole wall to fill up to the ceiling, the finishing pieces are tailored to your actual floor, walls and ceiling.

The wall matters too

In Elche, we check whether the walls have damp or are out of plumb, and we also look at skirting boards and services. If any building or electrical work is needed, you will find it clearly set out in the quote.

02 — Measurements

The measurements worth knowing

Approximate measurements are all we need for the first quote. Then we come to your home and take the final measurements for you.

  1. A1–A3 are the three width measurements of the opening, taken at different heights
  2. H1–H2Measure the height at each end; we work to the lowest value
  3. FAvailable depth
  4. !Where the switches, sockets, windows and radiators are
skirting board socket A1 A2 A3 H1 H2
Measure the opening in Elche once it is cleared. Add a photo from the front and one from the side showing the whole ceiling, as they tell us more than an exact measurement.

03 — Finishing

Uneven walls, ceiling and skirting board

Walls

The wardrobe sits level

A wall that isn't straight in Elche is resolved with cover strips or fillers cut to size to hide the difference.

Ceiling

Right up to the top, no gap

If you're in Elche, the wardrobe can be made as a single unit right up to the ceiling or with a separate top cupboard. Any unevenness is covered with a fitting piece.

Skirting board

Removed or worked around

The plinth has a solution: remove it or deal with it using one of our own. In Elche, this is decided before manufacturing.

04 — Interior

How to organise the interior

In Elche, it is your belongings and your clothes that set the design, not a prefabricated unit with fixed dimensions.

55–60 cm of depth makes it possible to hang hangers facing forward. If you have less, we suggest pull-out rails.
  • 01Hanging rails at one or two heights, depending on what the opening allows, for garments of any length
  • 02Fixed or adjustable shelves
  • 03Internal drawers to keep underwear separate from accessories
  • 04Shoe rack, trouser rack or pull-out trays
  • 05A top cupboard big enough for luggage, blankets and clothes you only get out at certain times of year

05 — Doors

Which doors to choose

Hinged

+You can see everything inside at a glance.

−You need a clear area in front of them so they can open.

Sliding

+They don't take up room space.

−Only part of the interior is visible each time you open them.

In Elche, the material you choose for the front of your wardrobe (melamine, lacquered, mirror, glass or a combination) changes both its look and its cost. The interior, on the other hand, can be kept simpler.

07 — Price

What affects the price?

First we give you an approximate cost as a guide, and before manufacturing we hand you the final price in writing.

01

Measurements and finishing

Out-of-square walls, height up to the ceiling and top cupboard.

02

Doors

Doors, material and opening system.

03

Interior

Layout, drawers and fittings.

08 — Process

How your order progresses

See a detailed explanation of our process →
  1. 01Free initial price guideWith an address, a few photos and approximate measurements, we give you a reference price.
  2. Step 02 · measuringWe check the measurements of your spaceWe check the walls, ceiling and skirting board at several points.
  3. 03We design once everything is agreedFinal measurements and agreed terms set out in the proposal.
  4. 04Fixed priceOne fixed price for the whole job: interior layout, doors, materials, fittings and installation, plus the work schedule.
  5. 05You accept and pay the depositOnce you have reviewed and accepted the project, you pay the agreed deposit.
  6. 06 · 2–3 wksWe make your wardrobeThe wardrobe carcass and finishing pieces, made so it fits perfectly.
  7. 07Installation and adjustmentsWe fit it level, close any gaps against the ceiling and walls, and adjust the doors until they are spot on.
  8. 08We check it togetherWe check the doors and drawers one by one, with you beside us. Any outstanding points are noted in writing.

What to prepare before installation

  • Empty, accessible recess
  • Floor and walls finished
  • Electrics sorted inside the recess
  • Access to the building entrance and lift

Limits of this solution

A wardrobe won't fix damp: it needs to be treated first.

In Elche, plasterboard, building or electrical work is carried out only if it is included in your quote.

In Elche, when the walls are noticeably out of plumb, the fitting panels need to be wider and are therefore more visible.

01

When a fitted wardrobe makes sense

A fitted wardrobe beats a freestanding piece of furniture when there is already a defined space: an alcove, the gap between two partition walls, the end of a hallway or the wall under a beam. Because it takes up the full width, there is no exposed side panel and no dead strip where dust collects.

It also makes sense when you want to make the most of the height. A floor-to-ceiling design adds several decimetres of storage compared with a unit that stops at two metres, and the top cupboard holds the things you rarely use. If the wall is short or the ceiling very high, a wall-to-wall wardrobe with a stepped top cupboard balances the proportions and blends in with the room.

White six-door fitted wardrobe with wooden handles in a bedroom with exposed beams in Elche

Instagram

Latest work by SI, ARMARIO

@si.armario

Made-to-measure wardrobes and walk-in wardrobes

Latest posts

02

Measuring the space: width, height and depth in Elche

The measuring comes before any catalogue drawing. Measure the width at three heights, at the top, in the middle and at floor level, because partition walls can be out by a few millimetres. Do the same with the height at both ends and in the centre, and note the depth at each end.

The differences between measurements show whether the opening is square or needs compensating for. With that information, plus photos of the space with a tape measure in view, the team can advise you on the type of finishing trim needed even before the measuring visit. The more complete that first submission is, the fewer corrections there will be later.

Have you already measured the space?

Message us on WhatsApp with a picture of the opening and your by-eye measurements, and we'll give you an initial assessment of your project.

03

Walls, skirting boards and finishes up to the ceiling

  • 01

    The doors of a fitted wardrobe end where the opening ends, and that is where the details matter. Two conditions decide it. The first is the skirting board: if there is one, it is removed or the side panel is trimmed so the unit sits plumb. The second is the ceiling, which is almost never level, so a compensating trim is used that covers the gaps without leaving a shadow.

  • 02

    When a wall leans noticeably, the solution is a side closure that absorbs the difference, rather than forcing the module against the walls. A good finish makes the wardrobe look as if it was built with the house, not simply leant against it.

04

Doors and access to the interior

With a fitted wardrobe, the door style is chosen together with the interior. Hinged doors give full access and work well when you have a metre of clear space in front. Sliding doors save that swing space, although they leave only half the width accessible at a time. Bifold doors, less common, are an option for narrow openings with frequent foot traffic.

There is a practical point: if the wardrobe is in a narrow hallway in Elche, opening a sixty-centimetre door could block the way. Decide how many doors you need and how the width of the opening is divided between them, because that determines the size of the interior modules.

05

Interior layout for clothes, drawers and top cupboards

A fitted wardrobe in a deep opening can take a side-to-side hanging rail or a double depth, but forty centimetres of depth only allows a front-facing rail. Start with what you use most: a hanging rail at shoulder height, drawers between waist and knee level, and high shelves for folded items.

The top cupboard, above the doors or above the modules, stores suitcases, blankets and out-of-season clothes. To reach it comfortably it is usually combined with a pull-down rail or a small stepladder. With the interior layout planned in the configurator, production receives the dimensions of each module and there are no pieces to improvise during installation.

Oak fitted wardrobe with open doors, drawers and hanging clothes in a bright bedroom in Elche
Measuring visit

Ask us to come and measure up in Elche

  • 01Tell us your name and which part of Elche you live in.
  • 02The exact date is agreed in a short WhatsApp chat, whenever suits you.
  • 03We charge €50 for the measuring visit, an amount we absorb when you place your order with us.
06

What to check before installation

A week beforehand, check that the space is empty, the floor is finished and the walls are painted. A fitted wardrobe goes onto finished surfaces, and touching up paint behind a piece of furniture afterwards is awkward.

Also look at sockets, switches and data points inside the space: you need to decide whether they stay accessible, are moved or are covered over. If there are pipes, radiators or a meter box, access has to be left for them. And check how the modules will get in: lift, front door width and staircase, because long panels do not always turn on a landing.

07

What affects the price of a fitted wardrobe in Elche

  • 01

    Three factors weigh more than the rest. The first is the surface area of the doors: more doors and more height mean more material. The second is the opening system, because quality sliding runners cost more than standard hinges. The third is the interior, with drawers, shoe racks and accessories.

  • 02

    If the space is irregular, finishing trims and compensating pieces also add design time. Send us your configuration with the measurements and the team will give you a price guide. If you then want to go ahead, the measuring visit is arranged, which costs €50 if you do not place an order and is free if you proceed. Once the design is approved, production takes on average two to three weeks, and the installation is arranged separately.

08

When the recess falls short

There are homes in Elche where the ideal alcove simply does not exist, and not every space can take a fitted wardrobe. If the space is very narrow, with less than fifty centimetres of depth, a conventional wardrobe falls short and it is worth considering a shallow-depth model. If the wall is load-bearing or has a duct running through it, it is best left untouched.

What we do is make the furniture. Opening up or blocking off an alcove, moving a partition wall or changing services is building work and is a job for a construction professional. When there is no alcove, it can be solved with a wardrobe built against the wall, which gives a similar result without altering the home. Whatever the case, we will tell you frankly whether the space delivers what you expect or whether another solution suits you better.

09 — Enquiry

Tell us everything you have in mind for the fitted wardrobe you want in Elche

  1. 1We start by going through your message and photos.
  2. 2In Elche, your first reply comes by WhatsApp, with an approximate figure.
  3. 3We measure up your home in Elche and finalise the quote. If you decide not to go ahead with us, the measuring visit costs €50; if you do, there is no charge for it.

We don't cut a single board until you've approved the design and the price.

Your fitted wardrobe

2 MIN

Our team drafts the text of the message; you read it, tweak it as you like and send it. Photos are added directly in the WhatsApp chat.

10 — Questions

Questions about fitted wardrobes

Once the installation is done, we explain the warranty on your wardrobe and how to look after it.

Can you make use of an opening that is not square?

Yes. Deviations are absorbed with side closures and trims fitted to the ceiling and the wall. The bigger the difference, the more important it is to measure at several points and send us photos of the space with the tape measure in view.

Does a fitted wardrobe need building work?

Installing the wardrobe in an existing opening does not require building work. If an alcove has to be opened up, a partition wall lowered or a service moved, that is construction and must be done by a building professional before we make anything.

Can it be floor to ceiling and include a top cupboard?

It is one of the most common configurations. The height is divided into a main section and a top cupboard with its own doors, and the ceiling sets the limit. In Elche many customers ask for it this way to store suitcases and out-of-season clothes.

Can any of the current wardrobe be reused when switching to a fitted one?

Sometimes. If the carcass is still sound, the doors can be replaced and the interior renewed. If the current wardrobe has damp or has warped, it makes more sense to start from scratch so you do not carry the problem over.

What is the difference between a fitted wardrobe and a wall-to-wall one?

A fitted wardrobe sits in an existing opening, such as an alcove or recess. A wall-to-wall wardrobe takes up the width of a room even where there is no existing opening, and is closed off with side panels so that it looks built in.

What is the minimum depth for a fitted wardrobe in Elche?

With fifty or fifty-five centimetres you can fit hangers on a front-facing rail. With less depth, garments can be hung sideways or you can use shelves and drawers, and the solution is decided once we see the real measurements.

Got a space you're not making the most of?

From Elche, send us a front-on photo on WhatsApp, along with the width of the opening at the top and at the bottom. If you don't place the order with us, the measuring visit costs €50; if you do, you pay nothing for it.

Your satisfaction is our priority We listen to your ideas and go through the measurements, finishes and every detail of the project with you.
WhatsAppQuote